Tools, Data and AI for an Effective Transition to the Next Generation Power Grid: From Synchronous AC to Inverter-based Renewables

#power-systems #simulation #stem #vancouver #technical #tools #electric #pes #data-collection #power-industry #wind #power-grid #solar #resilience #synchronous-generator #synchronous-generators #ai #WIE
Share

The traditional AC grid is undergoing a transition from a few large centralized synchronous generators to hundreds or thousands of local, renewable, inverter-based generation (IBRs), primarily wind and solar. The two modes of generation are based on different technologies, and their integration into a single hybrid system presents a number of technical challenges, while also opening up opportunities for the development of geographical equality, environmental preservation, and increased resilience. A significant amount of expertise and high levels of reliability have been developed over the past 139 years of the AC power industry. With the emergence of renewables, many of standard ideas for designing and operating electric power grids will need to change. In this talk, we will discuss the need for new tools of analysis, extensive data collection, and the role of AI in maintaining optimum operation of AC systems with significant DC penetration. We will also mention some of the tools available for improving the system's resilience while preserving the environment and the well-being of the population during system failure and natural disasters.



  Date and Time

  Location

  Hosts

  Registration



  • Add_To_Calendar_icon Add Event to Calendar
If you are not a robot, please complete the ReCAPTCHA to display virtual attendance info.
  • 2356 Main Mall
  • Vancouver, British Columbia
  • Canada V6T 1Z4
  • Building: Macleod building
  • Room Number: 3038

  • Contact Event Hosts
  • Starts 18 July 2025 07:00 AM UTC
  • Ends 06 August 2025 05:00 PM UTC
  • No Admission Charge


  Speakers

Dr. José Marti of University of British Columbia

Biography:

Dr. José R. Martí is a Professor in the Department of Electrical and Computer Engineering at the University of British Columbia, where he received his Ph.D. degree under the supervision of Dr. Hermann W. Dommel. He has made several contributions to the Electromagnetic Transients Program (EMTP), including the fdLine frequency-dependent transmission line model and the CDA solution for power electronic devices. For the next-generation power grid, he has developed the MATE algorithm for simulating AC systems and inverter-based systems in separate subsystems, as well as the SFA solution method to extend 60-Hz power flow software to accommodate large frequency deviations. He has also developed the i2SIM software to integrate the response of critical infrastructure during faults and natural disasters.

Address:Canada





  Media

6BC66652-4588-41B2-AE9D-86F6D469476E_1_105_c 101.31 KiB
54F8D9FC-D7D9-4090-8A41-517C30D6D2BC_1_105_c 110.14 KiB
FF22D0A0-6542-43F7-AB23-077F60F335C6_1_105_c 142.20 KiB
1235608E-8F14-41E3-90E9-45BC956B9B73_4_5005_c 44.50 KiB